COMPACT AND STYLISH
This little cube design makes FlashQ fit in any cameras with standard ISO hot shoe. Its stylish outlook perfectly matches with your camera.

COLOR OPTIONS
Photo is about colors. Photography gears should provide choices of color that reflect your personality. Not only in black.

SIMPLE USER INTERFACE
Both FlashQ transmitter and receiver get the same user interface: 2 buttons and 1 tri-color LED indicator.

AUTOMATIC CLEAR CHANNEL SELECTION & SIMPLE PAIR-UP
With a bulk of channels for selection, system can choose a clean channel smartly. At the same time, we can avoid collision with other wireless system in the same frequency band.

FlashQ system can support up to 8 receivers simultaneously, provided that those receivers had been paired up with the transmitter. This gives the scalability of multiple wireless flashes and makes your photography more creative.

COLD SHOE ADOPTER FOR FLASHQ RECEIVER
A cold shoe adopter is available for FlashQ receiver. This adopter makes the remote flash gets setup or positioning easily. The 1/4" screw threads underneath adopter provides another option for tripod mount.

SYNC CORD OUTPUT AVAILABLE
FlashQ receiver has a sync cord output via Func. Port (micro-USB form factor). The sync cord allows connection to the sync port of studio strobes or external flashes.


BACK TO BASIC. NO TTL

FlashQ supports remote triggering flashes at sync speeds up to 1/250 sec*. The trigger signal is barely on the central contact of standard ISO hot shoe. No TTL information is transmitted by FlashQ. This makes FlashQ compatible with most camera and Flash brands.

Notes of Compatibility
  • The NEW FlashQ Trigger (model T1-S) works on Sony cameras / flashes with latest Multi Interface Shoe (MIS), and other cameras / flashes from Canon, Nikon, Pentax, Olympus, Lumix, Metz, Nissin, etc.
  • The Original FlashQ Trigger (model T1) works on cameras / flashes from Canon, Nikon, Pentax, Olympus, Lumix, Metz, Nissin, etc. It does not support Sony's Multi Interface Shoe (MIS).
  • FlashQ Trigger (model T1-S and T1) is not compatible with the older Sony/Minolta-style Auto-lock Accessory Shoe.
  • FlashQ receiver is not recommended for the old high-voltage flashes and those flashes which not self-powered by battery.
 
Behind the scenes
FlashQ is the result of research and development by our leading engineering team in Hong Kong. We all share the mind: pushing the boundaries of innovation to create revolutionary products.
  • Miniaturized internal antenna design puts FlashQ to be the first Wireless Flash Trigger product of its size in the world. The size is small, and the signal is strong. FlashQ can provide reliable wireless flash triggering, at any angles.
  • Proprietary energy-efficient protocol enables FlashQ to be the device with low power and low latency radio. Therefore, FlashQ transmitter / receiver is just powered by a CR2032 coin battery with 180 days standby time.
technical specifications
  •  Size: 25 x 25 x 15 mm
  •  2.4GHz low-power digital radio
  •  160 radio channels
  •  10M operating range
  •  No TTL, up to 1/250 sync speed*
  •  Max. 900us X-sync latency (by FlashQ system)
  •  Tolerate Max. 300V port sync voltage (on FlashQ receiver)
  •  3V voltage present on male hot shoe centre pin (on FlashQ transmitter)
  •  PC Sync cable (via Func. port) for studio strobes
  •  More than 100K fires for a battery life
  •  6 months battery standby time
  •  LED indication: Green – operating; Red – triggering; Blue - pairing
   * On compatible cameras and flashes