COMPACT GN20 TTL FLASH WITH RADIO WIRELESS CONTROL & LED VIDEO LIGHT
FlashQ X20 is a powerful, feature-rich wireless flash, designed for off-camera flash photography. And it is small enough to fit in a pocket, the portability makes it a perfect match for compact mirrorless cameras.

 

first TTL flash in flashq FAMILY
We enhance the FlashQ System with TTL support. FlashQ X20 is a TTL-enabled wireless flash for SONY cameras with Mi shoe interface.

While keeping the small form factor of previous Q20 wireless flash, further packed with more features, including the TTL functionalities, intuitive controls with the round LCD display, and LED video light with adjustable brightness and color temperature.



Off-camera Flash with TTL

With our unique design, X20 flash main body can be easily detached from the transmitter. Enables the off-camera flash photograph any time and anywhere.

Wireless TTL supports Front & Rear Curtain Sync and Flash Exposure Compensation (FEC).

 

 


Bi-color LED Video / Modeling Light
LED lighting is commonly used in close-ups photography, modeling light or filming.

X20 has the bi-color LED light featuring the adjustable 3000K to 5500K color temperature, 20% to 100% dimming, high CRI of 90 for accurate color rendering.


Multiple Flashes Support

X20 equips with the same FlashQ radio, which features Automatic Clear Channel Selection and Simple Pair-up.

One X20 running TTL mode, can remote trigger additional manual flashes (Q20/Q20II flash bodies/FlashQ Receiver, up to 8 units) simultaneously, provided that those flashes had been paired up with the X20 transmitter. Multiple wireless flashes setup can make your photography more creative.



REMOTE CONTROL ...
Besides remote triggering X20, the transmitter can adjust the flash power ratio, EV Compensation and LED video light output level wirelessly.



Easy to Charge with USB 
It is convenience to charge both X20 flash body and transmitter with standard USB power source. Just make certain to use rechargeable Ni-MH batteries on X20 flash body. 



Tiltable Flash Head
For ease of setup bouncing light effects, X20 flash head can tilt up to 90°, with click-stops at 0°, 45°, 60°, 75°, 90°.



Built-in Color Gel / Filter Holder
X20 flash head has a built-in gel holder for more versatile shooting options. It facilitates quick installation and removal of colored gels, so you change the light color at any time you want.



Rectangular Shaped, Able to Stand
X20 has a rectangular form factor, which makes it easy to stand or position itself in any orientation. It is especially useful in setting up off-camera lighting.



With Tripod Mount
A female 1/4” receptacle is included, which allows it to be attached on a tripod.



Compatibility


FlashQ X20 can be used on the following SONY camera models:

  • α7, α7 II, α7 III, α7R, α7R II, α7R III, α7R IV, α7S, α7S II, α7S III, α7C
  • α6000, α6100, α6300, α6400, α6500, α6600
  • RX1, RX1R, RX1R II, RX10, RX10 II, RX10 III, RX10 IV
We will continue to update the compatible models.

X20 Technical Specifications
  • Guide Number 20 (at ISO 100)
  • Focal length coverage: 32mm (on 35mm format)
  • Manual flash power ratio control from 1/1 to 1/64
    (further supports 1/3 EV steps setting from 1/1 to 1/16)
  • LED video light (both brightness and color temperature adjustable,
    Max. 60 lux output at 1 meter)
  • 2.4GHz low-power digital radio, 10 meters wireless operating range
  • Tilt-capable flash head, up to 90° and with click-stops at 0°, 45°, 60°, 75°, 90°
  • Other functions: S1 / S2 optical slave, modeling light (LED)
  • Transmitter per charge : 30 hours operation and 120 days standby
  • Two AA-size alkaline / rechargeable Ni-MH batteries for X20 main body
  • Recycling time (1/1 full power output) : 5 sec. by Ni-MH batteries /
    6 sec. by fresh alkaline batteries
  • Number of flashes : 100 - 2000 flashes
  • LED lighting time: approx. 1 hour (at full power LED output and by Ni-MH batteries)
  • Flash color temperature : 5600K±200K (same as daylight)
  • LED color temperature : 3000~5500K adjustable, tolerance ±300K, CRI 90
  • Dedicated socket for FlashQ transmitter attachment
  • Dimensions : 59(W) x 101(H) x 30(D) mm (with FlashQ transmitter attached)
  • Weight : 120g (without battery)